08-17-2016 11:59 AM - edited 03-01-2019 05:01 AM
Hi,
I have an APIC-SIM-S APIC hardware simulator which I am trying to upgrade to 1.2.
I started with it running 1.1(4l). I've tried going to the first 1.2. I've tried several permutations. Its currently on 1.1(4m) but when I try to move to anything) 1.2+ it looks like it loads and then just hangs after the reboot
Press any key to continue.
Press any key to continue.
Press any key to continue.
Press any key to enter the menu
Booting Insieme Fabric Controller 1.2.1m on /rfs1 in 0 secconds.....
It never comes back from that. Ive tried warm booting and cold booting as well.
The upgrades are via the CIMC and vKVM mounted Virtual image.
C220M3.2.0.3.0 (Build Date: 08/01/2014)
Firmware 2.0(3d)
UCS VIC 1225
Am I missing something key to moving from 1.1 to 1.2?
Thanks!
Claudia
08-17-2016 01:19 PM
There are only two supported CIMC versions for APIC: 2.0(3i) and 1.5(4).
Please use the HUU for CIMC and update "ALL" drivers and try again.
Thanks
T.
http://www.cisco.com/c/en/us/td/docs/switches/datacenter/aci/apic/sw/recommended-release/b_Minimum_and_Recommended_Cisco_ACI_Releases.html
08-18-2016 10:34 AM
Just a quick follow up...Upgraded CIMC and all drivers to 2.0(3i) and still had the same behavior. So upgraded to 2.0(1p) and that worked. None of the 1.1(4m), 1.2x, or 1.3x simulator upgrades worked even with the upgraded firmware, but the latest 2.0 did. Not sure what to make of that....
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide