Hello Everyone,
I have access to Cisco dCloud and trying to practice 'Getting Started with Cisco ACI 5.2 v1' lab. When I log in to Leaf or Spine switches, i can't run NXOS style commands. I tried logging/ssh in to Leaf directly and via Apic but same result. I wanted to ask if this is because this lab is built on simulator and therefore NXOS commands not supported, or am I missing something here.
I read some documentation and it looks like NXOS commands are supposed to be run in leaf1# mode however every time I log in, it drops me in admin@leaf1:~> mode. No sure if thats the reason and if yes, how can i switch from admin@leaf1:~> to leaf1#.
Please see the output below. I will appreciate any help/suggestions
ssh apic1.dcloud.cisco.com
login as: admin
Application Policy Infrastructure Controller
admin@apic1.dcloud.cisco.com's password:
Last login: 2022-04-17T04:25:57.000-04:00 UTC
apic1# ssh admin@leaf1
Warning: Permanently added 'leaf1,10.0.168.64' (RSA) to the list of known hosts.
admin@leaf1's password:
admin@leaf1:~>
admin@leaf1:~> show version
bash: show: command not found
admin@leaf1:~> show lldp neighbors
bash: show: command not found
admin@leaf1:~>
Regards
