Hello all,On one of my leaf switches I have run the command debug system internal epm trace detail which I guess sets a debug level on the leaf. Is there a way to "undebug" or "no" this command to turn it off now that I'm done with it? I can't seem t...
I just set up the INB for an ACI Fabric for the first time...My steps are very similiar to the link below. The only difference is that I did extra steps to have the INB subnet leaked into another Tenant which has regular OSPF L3Out to external networ...
ow to Connect cisco ASA in ACI fabric. Do we need to connect multiple interface from ASA to Leaf switches for inside, outside and DMZ or just one port from ASA to Leaf via VPC ?
Hello Team,When deploying AVE and configuring an EPG as in VXLAN mode (VM learned via Vxlan Encap), if we want to do epg extention (layer 2 extension) to a firewall, how to proceed? (we added static path to the Fw + Associate its physical dom) , but ...
Hello Team We are going to implement the Cisco ACI Multi-Site solution between two sites. One of the main components of Multi-site is MSO (ACI Multi-Site orchestrator) which I found the "ACI-MSITE-VAPPL" part number for it. Based on the Cisco white p...
hello guys, We recently implemented VMM integration with AVE using vxlan as encap mode. Now we want to implement L4-L7 service graph and use it on the VMM domain. Is it possible to use L4-L7 service graph with vxlan? thanks,
Hello everyone! I have seen some forums about that, but im not clear about de topology when i have 2 FW in active/standby. We have two firewall and we have 4 leaves (2 per site) in the topology. There are 2 sites, but connected directly by a pair of ...
hello guys,had anyone encountered the fault below when adding new epg to avs vmm domain:"deployment for EPG failed on Domain AVS DUO To No valid Mcast Address Allocated For the EPG"thanks
Hi Guys, I am trying downgrade Nexus 93108TC switch from the current ACI 14.2 firmware to NX-OS 7.0(3)I7(8). I am following steps given in the below document however got stuck at step-6. https://www.cisco.com/c/en/us/td/docs/switches/datacenter/nexu...
Hello all, We are migration to ACI from old cisco infrastructure and we have issue how to migrate vlan that has end points and network elements (elements that have loopback IP, that is reachable over interface IP via static route configured on the ro...
Hello all, I'm curious what would happen if you lost all the APIC's in your cluster, and then you had a Leaf that rebooted for some reason (perhaps it temporarily lost power or whatever). Would that Leaf retain its configuration on a disk or flash me...
Hello everone,we notice a strange behavior while query the APIC with REST. A management system got a lot of informations via REST Queries to the fabric. Everything works fine except for one request:https://$APIC/api/node/class/faultInfo.json We alwa...
Hi communityyesterday I tried to upgrade my ACI fabric with a current version 2.1(1h) to the recommended version 4.2(7f), so to achieve the upgrade I need to pass by an intermediate version which is the 2.2(2d).the upgrade from version 2.1(1h) => 2...
Hi.I have some question about k8s networkpolicy with selectors to pods or NS. My simple example NP is apiVersion: networking.k8s.io/v1kind: NetworkPolicymetadata:name: access-hello-label-podnamespace: testspec:podSelector: {}policyTypes:- Ingressingr...
Hi All, I am looking for a cisco document to decommission pod from Cisco ACI fabric which would describe all steps in details. Currently we have a multipod setup with 3 pods (1,2 and 3). We have to decommission pod3 from our ACI fabric. We have alrea...
