cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
975
Views
0
Helpful
1
Replies

ACE 4700 authentication through IAS Radius

Hi ,

I configured my Cisco ACE appliance for IAS Radius authentication. The authentication is not sucessful. I tried different attribute settings on the IAS server, but still the authentication fails.The configuration details on ACE appliance is as below,

radius-server host 10.X.X.X key 7 "key" auth-port 1645 acct-port 1646 authentication accounting timeout 20 retransmit 3

aaa group server radius RADIUS_SERVER

  server 10.X.X.X

aaa authentication login default group RADIUS_SERVER local

The IAS server is Windows 2003 server. I have also attached the screenshot of the Radius server. Can someone please help in resolving the authentication issue please.

Thanks

Muralikrishnan

1 Reply 1

Sean Merrow
Level 4
Level 4

Hello Muralikrishnan,

From the last screenshot you have in your document, the Microsoft server is stating the reason for the failure as:

Authentication was not successful because an unknown user name or incorrect password was used

You might want to get a capture of the authentication process and verify that the username being sent to the RADIUS server is exactly what is configured on the RADIUS server.  Also, double-check the password used.  Your configuration on the ACE looks Okay, so I would focus for now on the user name and password.

Hope this helps,

Sean

Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: