01-10-2013 09:38 PM
Good day,
I would just like to double-check a point with the forum on licensing on 4710 Appliance.
If with version 4.2 and above 2Gbps Bandwidth licence is required, the output of the sho license status should be? We have this currently:
ACE/Admin# sh license status
Licensed Feature Count
------------------------------------ -----
Compression Performance in Mbps 2000
Web Optimization Concurrent Conns. 105
SSL transactions per second 7500
Virtualized contexts 20
Module bandwidth in Gbps 1.0
I believe the bold line should not be 1.0, am I correct?
Thank you in advance.
Paul.
01-11-2013 04:26 AM
Hi,
I am not aware of any condition that version 4.2 should have 2 Gbps Bandwidth.
Please look at the following link:
By default you get the following with ACE4710 ( Which is matching with the info you provided )
Table 2-2 lists the default feature capabilities of the ACE.
Parameter | Default |
---|---|
Virtual Contexts | One Admin context, 20 virtual contexts |
Bandwidth | 1.0 Gbps |
Secure Sockets Layer (SSL) | 7,500transactions per second (TPS) |
Hypertext Transfer Protocol (HTTP) compression | 2.0 Gbps |
Application Acceleration Connections | 1001 |
1 Application acceleration connections are fixed at 100 concurrent connections in software release A4(2.0) for all license bundles. |
read below for all possible license for ACE4710.
Information about ACE Licenses
Table 2-1 summarizes the contents of the ACE 4710 license bundles available in software release A4(2.0) and later. You can increase the performance and operating capabilities of your ACE by purchasing one of these license bundles. Note that the number of application acceleration connections is always 100 regardless of the bandwidth of the installed license bundle.
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: