Hi All,
My ACE module doesn not boot when i issue the reload command. Also no power enable module 7/power enable module 7 does not work. The only solution is to physically remove and re-insert the module on the switch.
Please find the output of ACE module booting up below ,it looks like there is a memory error of some sort. You will also notice that the ACE went into rommon, this was because I was performing a test to get the ACE to boot from an image on the Supervisor.
Unmounting ext3 filesystems...
Unmounting FAT filesystems...
Unmounting done...
INIT: Switching to runlevel: 6
INIT: Sending processes the KILL signal
Rebooting... <1>
sbmac stopped<0>Rest
System Bootstrap, Version 12.2[120],
Copyright (c) 1994-2007 by Cisco Systems, Inc.
Slot 7: Running DEFAULT rommon image ...
ACE platform with 1056876 Kbytes of main memory
Autoboot: failed, boot string not found
rommon 1 > boot eobc:
boot string configured on SUP is "sup-bootflash:c6ace-t1k9-mz.A2_3_1.bin&qu
ot;
Download Start
!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
!!!!!!!!!!!!!!!!!!!!!!!!!
Download Completed! Booting the image.
Uncompressing Linux...
Starting the kernel...
INIT: version 2.78 booting
Mounting Second Ramdisk ....
Second Ramdisk successfully mounted
Configuring network interfaces.
CF dump: Register callback functions
dosfsck 2.11, 14 April 2006, FAT32, LFN
/dev/cf: 10 files, 26399/63414 clusters
FAT FS is ok
Compact Flash size 1278624(in 1k blocks) ...
Core file size 208900
Available free size in cf is 796640 (in 1k blocks) ...
set_coredump 2.11, 14 April 2006, FAT32, LFN
first_cluster = 0x608e num_cluster = 0x40 (64)
inserting procfs
inserting isan_kthread
inserting wiremod
inserting klib
inserting resdrv
inserting tlv
inserting sse
inserting kpss
inserting sdwrap
creating sdwrap device
inserting klm_tl
creating tl device
inserting klm_scp
inserting klm_mts
creating mts0 device
creating mtscfg0 device
inserting utaker
creating utaker0 device
creating utaker1 device
inserting sysmgr-hb
creating sysmgr-hb device
inserting modlock
creating modlock device
inserting bufmgr
inserting pkt_fifo
inserting encdec
creating encdec device
inserting pseudo
inserting drammap mod
creating drammap device
inserting ixp_dnld
creating ixp_dnld device
inserting sysdrv
creating sysdrv device
New registry installed.
INIT: Entering runlevel: 3
inserting i2c module
inserting ssa driver
inserting cde driver
inserting bf_dnld driver
inserting pfm_drv driver
inserting regaccess driver
inserting bf_nvram driver
Firmware compiled 19-Sep-07 18:27 by integ Build [26368]
ACE Daughter boards DB1 not present DB2 not present.
downloading fpga to cde 1
Read 2398454 bytes from ./cde1_core.bit
FPGA Date: 2007/12/18 Time: 22:22:1 0
CDE 1 download successful
downloading fpga to cde 2
Read 2377744 bytes from ./cde2_core.bit
FPGA Date: 2007/12/18 Time: 22:22:17
CDE 2 download successful
FPGA Programming Done
CDE 1 revision ID 0403
CDE 2 revision ID 0402
enabling cde 0 interrupts
finished CDE setup
Configuring NP 1 Memory
Configuring NP 2 Memory
.............................
Waiting for NP 1 SRAM memory to clear...sData bus error, epc == 00401618, ra ==
004015a8
A_BUS_ERR_DATA_0 0x896c1f00001f6c89
A_BUS_ERR_DATA_1 0x5fdffeff
A_BUS_ERR_DATA_2 0x5fdffeff
A_BUS_ERR_DATA_3 0xffffffff5fdffeff
A_BUS_L2_ERRORS 0x0
A_BUS_MEM_IO_ERRORS 0x10000
uccess
Downloading NP 1 Image
..... 0x4b4b74 (4934516) bytes downloaded
/itasca/etc/rc3.d/S11_setup: line 59: 618 Bus error ./ixp_prog q
nx.bin 1
Loading Nitrox driver.
Writing register at address 3838 with e00
size = 8108
% IXP 1 XScale Core reset detected !!
Ctx memory range(0x0000000-0x10000000)
Cleared 262144 1024-byte blocks in 5 requests.
Writing register at address 3898 with 1
Writing register at address 38b8 with 1
N2 SPI INIT PROGRAM.
Initializing Nitrox SPI1
configuring using falling clocks
Initializing CDE SPI registers
Nitrox init completed.
inserting IPCP klm
n2_perf_stats loaded
||||$T0a25:c21ecb88;48:801f97f0;1d:8076ff40;#16
Could someone let me know if this is Software issue or the Hardware.
Thanks in advance.Looking forward to hear something on this.
Regards,
Alex.
