cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
872
Views
0
Helpful
3
Replies

ACE Source NAT

shahkamrah
Level 1
Level 1

Hi Team,

I have ACE implemented in the routed mode.We have 2 servers and 2 users in the same vlan.

2 of the servers are getting loadbalanced.Now the other 2(users) which are not getting load balanced want to access the severs using in VIP for the load balanced servers.

Now the issue is all the servers are having the same subnet, How should i proceed in this can i have the sample configuration regarding this.

3 Replies 3

aslamta123
Level 1
Level 1

Hi,

For source nating you can try as follows ..

-- define a class --

class-map match-all NAT

2 match source-address " subnet "

-- in policy map multimatch --

class NAT

nat dynamic 9 vlan "server vlan "

--create a nat pool in server interface --

nat-pool 9 "IP pool" netmask 255.255.255.255 pat

Regards

Aslam..