10-14-2008 09:48 AM
Is it possible to load balance 2+ ACS servers behind an ACE module? If so, any special caveats or loss of functionality?
Casey
Solved! Go to Solution.
10-21-2008 05:57 PM
10-20-2008 11:52 AM
If you have the ACE devices in bridge mode, traffic from the servers will be bridged and not loabalanced to the ACS. You need the ACE devices in router mode so you can set your default gateway pointing to ACE and then ACE can loadbalance the request to the ACS. Within a single context, only 1 ACE can be active.
10-20-2008 12:13 PM
I'm running in router mode. My question was regarding whether or not the services that the ACS server provides are suitable for load balancing via the ACE. Specifically we use an ACS server for our wireless (LWAPP) infrastructure and we'd like to have multiple active ACS servers behind a load balancer.
10-21-2008 05:57 PM
here you go, this should help.
ellis
10-22-2008 08:16 AM
Perfect. Thank you.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide