Application Networking

Hello,We are in the idea of performing PBR for traffic that enters 4 interfaces and needs to be policy based routed at L4 (IP addresses and ports).What are the pro's and cons' of the 2 approaches?I understand that this is done well (simply) in the 65...

Hi ALL , Please help to disable telnet for ACS 1120 Appliance version 5.0.0.21 .is there anway to do it , not able to login via telnet and ssh it says wrong credentials but webgui is working fine with same user and password .===========Thanks

Hi all,I'm trying to assemble WAAS test lab, using virtual workstation (VWS) and server (VSRVR) on seperate VirtualBox VMs.This is test environment, that I decided to use before I realize that I have no physical routers right now - And this is my to...

Hi,We recently deployed a server farm where we noticed an increase of 200ms with processing versus when we had a single server in place.  Can someone advise what the expected increase latency should be when moving a group of servers behind the ACE Lo...

Hi,  I have configured some redirection on our Ace Loadbalancers but it does not seem to work. Can anyone look at the key config pasted below and let me know where I am going wrong?Thanks in AdvanceAdrian

I saw the following doc http://www.cisco.com/en/US/docs/ios-xml/ios/slb/configuration/12-4t/slb-12-4t-book.htmland I was thinking about the difference between this SLB IOS feature and Cisco ACE device . Are they same other than performance ?

Hi folks, i'm a newbie to cisco load balancer.Can anyone provide me a guideline on how to capture the incoming and outgoing packets on the balancer?The load balancer is connected in between the customer DCN and cisco switches 2960.The reason of captu...

Hi All!I have already configure loadbalance for http proxy servers (squid with NTLM) on ACEwith NAT and http header-insertionIf browser send clear request without username and password all done, i see client ip source into x-forward header.Else nothi...

Hi,If i set the timeout multiplier to be 3 on a content rule so it's 48 seconds, why when i look at the 'flow-agent show fcb' information does it give me the correct inactiveTimout but then allocate a 'New FCB time' of 120 which overrides my configur...

Hello,I have a problem with an ACE 4710 regarding to the ping of especially one VIP address.Software - Version is:Software  loader:    Version 0.95.1  system:    Version A4(2.2) [build 3.0(0)A4(2.2) adbuild_15:26:12-2011/10/10_/auto/adbure_nightly4/r...

HelloI want to configure my CSS runing code 8.xx to load balance based on a string of in the http header. The users are using mobiles to synchronise mail content. The sticky rule needs to be configured based on the authorization strings in the http h...

hiis there any chance to change my requeste on ace like this?the request is http://www.xpto.com and i need to be rewrite to http://xpto.comthanks in advanceAntero

Is there a way to rename a server farm, health probe, real server or virtual service without having to completely rebuild it? I'm running 3.0(A3). Sent from Cisco Technical Support iPad App

Hi Experts,      I have a ace 4710 set as load balancing http and https only, seems working fine.     Now I have another requirment to NAT all real servers IP (server side internal network 10.8.8.0) to VIP (192.168.1.20).our configuration is as below...