Application Networking

I've followed the directions on setting up a VB for Windows 2008 Core, and it has always worked in 4.1.5a. We're now running 4.2.1. Am I missing something? We keep getting this error:  PARTIALLY CONFIGURED, and yet it doesn't tell you what else you n...

Dear NetPro gurus,One of my customer is trying to setup an EtherChannel (LACP) on a pair of Nexus 7000.  However, doesn't matter what we do, the port Eth 1/17 always become suspended.  We have tried swapping fiber cables and also swapping SFPs, but n...

Hello,I have a 3925 ISR G2 router equipped with the following:NAME: "CISCO3925-CHASSIS", DESCR: "CISCO3925-CHASSIS"PID: CISCO3925-CHASSIS , VID: V03 , SN: FCZ151920TANAME: "Cisco Services Performance Engine 100 for Cisco 3900 ISR on Slot 0", DESCR: "...

Hello,We're planning on upgrading our production WAEs this weekend in one of our regions. Is it necessary to run the disk delete-data-partitions, after the upgrade? The documentation says you may improve the DRE performance, but doing this will take ...

Is the XFF (http://en.wikipedia.org/wiki/X-Forwarded-For) on the Cisco CSS 11503?  If not, is it on the roadmap for a future code release?Thanks,Kev

Hello everyone.First of all, I want you to know that I do understand that it's not a good design at all, but I still need to implement it.My ACE20 in 6500 works in routed mode with VLAN 101 (10.0.101.0/24) as the client-side VLAN. I therefore have Vl...

Hello Friends,I am facing a problem with the ACE4710, problem description as follows;We have two IronPort web security boxes loadbalanced using the ACE4710 which configured in the bridged mode for transparent caching . Now we are facing a strange pro...

Hi allI'm having problems setting up a new ASA 5510 with WCCP to our Squid server (worth nothing that we've never used WCCP before, so this is a first).We've created a GRE tunnel on the Squid box (running Linux):# iptunnel add gre1 mode gre remote 10...

We have recently transitioned one of our Ecommerce products to a new data center, at which we now use a one-armed load balancing approach rather then the routed load balancing approach we used previously. This is casuing us some issues as we generall...

Hi,We have a CISCO CMS and we have configured it to load balance some webs pages that can be reached with HTTP and HTTPS with Sticky session.The problem we are facing is that once a computer is connected using a protocol we cannot change,t0 - PC1 est...

- 172.20.203.3:135172.20.1.191:2751-PT AD Int Error----- 172.20.221.205:51786172.20.1.176:80-PT In Progress----- 172.20.1.191:2751172.20.203.3:135-PT AD Int Error----- 172.20.221.3:443172.20.1.29:25403-PT AD Int Error----- 172.20.1.176:80172.20.221.2...