Application Networking

Hai all , I have an issue with cisco's LB , it giving error while accessing citrix Web Interface , if i use it for some time and leave idle and use another web page and come to use the citix page it says - web interface session is in an inconsistent ...

Hi,I have identified a number of MIBs that I want our OSS systems to use to collect performance data relating to our ACE (ACE20-MOD-K9 running 30.(0)A2(1.6a)).  I have identified the MIBS from the CISCO-SLB-MIB and the CISCO-ENHANCED-SLB-MIB but when...

We have 2 serversrserver host server1rserver host server 2they both are associated on one serverfarmserverfarm host CUSTOMERrserver server1rserver server2We have multiple VIPSsticky http-cookie customer cookie customer cookie  cookie insert  replicat...

We're running the ACE SM (3.2) and need to be able to hit a VIP from the 192.168.92.206  back-end server. We have put the following config in place:class-map type http loadbalance match-any ES-SERVER-INIT    2 match source-address 192.168.92.206 255....

Does anyone know if/when Cisco WAAS will be able to optimise CIFS traffic that is digitally signed using SMB?Our customer has a Windows 2008 environment with SMB enabled, so as a result we are not seeing any CIFS benefits nor is the pre-positioning f...

Good day,We currtenly have two dc's (site A and site B)We are using netapps as our SAN and we ar booting our server directly from the SANSAN A and SAN B are insync and the network between site A and site B is routed.The challange:When a server is fai...

Logged into and got below, Can I do a hot reseat of the drive or do I have to shut down (docs say too) before reseating? Any other thoughts would be appreciated. No directory /local/local1! Logging in with home = "/". System Initialization Finished. ...

Trying to setup snmp for my wae devices in Cacti, all my network devices go in fine, but the wae devices come up as unknown.  If I go to a command line and try to add a basic public RO community, it only has an option for RW, if I just set it to publ...

Hello All,I have configured four context in ACE module.I am trying to authenticate individual context through ACS.Admin context authentication is working perfectly fine , and it is assigning the role of Admin for all the ACS users.But when i am tryin...

Hello Support,I need assistance in creating the keepalives for connecting to exchange servers.I have 3 CAS servers and need to ensure the following TCP ports are monitored, 443, 135, 143, 993, 110, 995.I can easily create a port to monitor, but i nee...

Hi,We are starting to get applications that will respond to hundred's of ports. This would require 1 probe per port. As you might of guessed, this would be time consuming to configure. Is there a way to configure group's of ports or the only way is t...