I am trying to configure a VPLS connection -- connection is showing as down bkf-h-spald-02#sh l2vpn service allLegend: St=State    XC St=State in the L2VPN Service      Prio=Priority        UP=Up       DN=Down            AD=Admin Down      IA=Inactiv...

I am trying to shape AF1 traffic I am seeing hits on my other queues but not AF1 I know there is traffic matching my ACL Q has anyone got a similar configuration ? class-map match-any ce_af1_customer  description Match AF1 Class map match ip dscp cs1...

hello we have an ISR4451-X/K9 running isr4400-universalk9.03.13.02.S.154-3.S2-ext.SPA.bin we have an  ISR4451-X-4x1GE module installed g0/0/0 presenting rj45 to the LAN g0/0/1 presenting an SX SFP to the WAN when the customer moves g0/0/0 into a new ...

I am working with a number of 1921 series routers that will not bring up BGP on PPPoA or PPPoE connection the routers are both running the same code below is a working 1921  Interface    User               Mode         Idle     Peer Address  Vi2   ...

hello I am trying to use an EEM Applet to cause subnets to be dampened I can cause the route to be dampened in  a lab environment by removing & adding network statements under BGP I am trying to use an EEM Applet to achieve this the current status is...