Application Networking

Hello All,I have a strange issue but I'm not sure it is content switch related in any way.A group of hosts talk to two servers connected behind a content switch via a VIP.Some dev are complaining about a high level of discarded / reset connections.Fr...

Hello,I know the ACE Module does support the protocol RTSP. The App-V of Microsoft is also using the protocol RTSP.Unfortunately in my configuration,  the ACE to load balance the RTSP, the ACE seems not to recognise the negociated TCP ports in the ra...

Hi allWe tried all the options like ftp,tftp,scp,etc., to copy cisco application networking manager license file from my pc to its server which has CISCO ADE OS .But unable to copy .can anybody know correct method to copy ??Thanks & RegardsSanjeevi

Can the WAAS equipment receive a shutdown signal from the UPS and automaticlly run a shutdown process?

Hi,I have setup session stickiness as below.  However, I'm not seeing anything in the sticky database.  Can anyone advise what I've got wrong on the config extract below.  I can see output for the 'show stats sticky'.sticky http-cookie vip-stick STIC...

Hi,Any resond why we are not seeing  any version for outlook for MAPI in CM and CLI?Using version 4.2.1 and 4.2.3 on the WAE's#sh statistics accelerator mapiMAPI:   Global Statistics   -----------------   Time Accelerator was started:                ...

Hi,I am quite new in this field , where i need to configure and understand the concept of load-balancing through ACE.In my existing network set-up , i have some application servers as well as some other servers where i am looking for load-balancing.I...

Hi allI am currently working on a network that is utlising WAAS for acceleration. Software is 4.1.5fWe mainly have WAE 674s in the network, but I am trying to bring up an NME-WAE-502 in a 2811 router.I have configured the router, and it is working we...

Hi,I installed WAAS in inline mode, the inline card was in shutdown state, when I apply the no shutdown command in central site we lost communication to the other sites. Originally we tried to implement WCCP (topology3) since we have two MPLS links a...

Hello All,Could you let me know how to copy the 4710.bin file to a tftp server as i have tried and not been successful.Thanks again

Is there any possibility to allow asymetric routing for non-balanced flows.We face a situation in which a server in a LB serverfarm tries to connect another serverin a different segment. The ACE is gateway for this segment but has an own interface in...