Application Networking

I am referring to the following link:http://www.cisco.com/en/US/docs/app_ntwk_services/data_center_app_services/css11500series/v8.20/configuration/administration/guide/Offdm.html#wp1069939It says in here - •Boot via Network - Allows you to boot the...

Hello,Is load balancing FTP and SFTP the same configuration? Or is it something different? Please provide a link to documentation or sample config.Regards,

We would like to move our 4.1.3 central manager to a different city. I understand that the waas devices dependent on the CM continue to operate if the CM is down, but if a waas device reboots while the CM is down, will it continue to operate?

Hello,I have a specific problem in virtual context.I tried save capture file to disk0:, but it was full. ok, I deleted all files. There was no files, byt I have seen 9Mbytes used disk space (??). result: 11MB disk space, 9MB used, 2MB free... but the...

Is it possible to do the following on CSS with SSL module:content ssl-rulevip address 10.10.10.1protocol tcp port 443 add service ssl_module1 application ssladvanced-balance sslactive content rule-1vip 10.10.10.1 port 80add service service1add servic...

Hi experts, I am configure a new CSS 11506. But I got the problem for accessing the management port. After connected between CSS mgmt port and a laptop, the CSS is unable to ping the tap. Does any expert know what is the problem? Is it related to spe...

ACE in bridge mode, VIP is on the same subnet as rservers and other servers. There is no issue for clients from internet to access the VIP. However, the servers on the same subnet of the real server cannot access VIP. I guess that's because after VL...

I still have some old 3660 routers running 123-15 IOS in my network, I am wondering whether these routers level of WCCP will work with 4.1.3a, presently I am running 4.1.1c. the majority of the routers are 2851s running 124-15.T8 so should not be a ...

At a high level I have the following scenario:Client-EdgeWAE-(WAN)-CoreWAE-6500-FWSM-External HostActually have 2 core 6500's with FWSMs and a single WAE core device (4.1.3). I have VLAN 100 assigned to the FWSM as the inside interface. Doing inbou...

HelloDoes anyone know a solution for my problem?Is ist possible with the ACE to balance a service (e.g. web service) on different Real-Servers depending the source-Range the Client come from? Point is that both clients call the same VIP address, butd...

we have a simple layer3-4 port 80 app thta is being load balanced by ACE and created an HTTP probe that actually acts more like a TCP probe, since we took a default on just about all the attributes:probe http WEB_SERVERSexpect status 200 200Unfortuna...

Hi,I am working on a scenario where we have a data center (web server farm) that we are going to connect to two ISPs. We want to make sure that when one ISP fails, our web server farm is still visible from the Internet through the second ISP. When...

Hi - I'm looking to baseline a network for a period of a month prior to deploying a WAAS solution. There are 2 data centres and approximately 100 edge sites. My client has identified 4 points where they want probes installed to achieve this baselinin...

i have an CSS11506 where i use the Direct Server return modecircuit VLAN19description "LOL" ip address 192.168.158.39 255.255.255.240 no redirects service WEB_LOL_36 ip address 192.168.158.36 keepalive type tcp keepalive port 80 protocol tcp port 80 ...