About g.raymakers

g.raymakers · 02-12-2020

Hi, I've been trying for several days to discover a 9800-80 running 16.12.2s code on a DNA-C running 1.3.0.6 code. The software version should be OK according to the compatibility matrix. netconf is enabled on the device, the ports match between de...

g.raymakers · 10-18-2016

Hi, I was wondering whether someone can help me with the following. We're running an ISR4321 with a NIM-ES2-4 module and wanting to enable 802.1x on the switchports of the module. When trying to apply the switchport config, all command srelating to ...

g.raymakers · 07-30-2013

Hi,hopefully an easy question, but when one uses the "match community" command in a route-map, does the following work :route-map bgp permit 1match community 65000:2or does it have to be:ip community-list 20 permit 65000:2!route-ma...

g.raymakers · 05-09-2012

Hi,I'm runing an ASA with 8.2(5) code with a remote access VPN config. the VPN users are authenticated against AD using LDAP. This all works fine except when users some special characters in their password. The strange thing is that the $ character d...

g.raymakers · 08-03-2011

i'm looking to import routes from one VRF into another one. I don't want all routes, just a few, so looking to filter the import using the import map feature. Question I have is, what properties can I use in the the import map filter? e.g. I've seen ...

g.raymakers · 03-09-2020

Hi Folks, was this issue ever resolved? I'm running into the same issue with a 9800-80 WLC running 16.12.2s and DNA running 1.3.1.5.... I have a 3504 WLC in another fabric and that works fine. Its just the 9800-80 WLC (and associated 9115 AP) that do...

g.raymakers · 07-30-2013

Thanks Peter, Jose. I also always used the community list, but noticed this other config on another networkRegardsnGuy

g.raymakers · 08-17-2011

Hi Peter,The case i was looking into is the following. A network with about 7 PE's with each 2 user VRFs defined and one PE with a shared services VRF. In order to give the user VRFs from all PE's access to the Services VRF, I need to define the rou...

g.raymakers · 08-16-2011

Quick follow-up question.. when using this feature of 'leaking' routes between VRFs - am I right to think that I need to configure the 'leaking' on each PE device? so update the RT import/export of the involved VRFs on each PE?Many Thanks,Guy

g.raymakers · 08-03-2011

Many thanks Peter.Thans for the pointing out the permit on the community list. best regards,Guy

Member Since	‎10-26-2001 02:41 AM
Date Last Visited	‎01-14-2022 12:02 AM
Posts	77

User Statistics

User Activity

Partial Collection Failure (Unknown Error)

ISR4321 with NIM-ES2-4 and dot1x

"match community" question

Special character problem

VRF import map question

Re: Cisco DNA assurance and Wireless clients

"match community" question

Re: VRF import map question

Re: VRF import map question

VRF import map question