Application Networking

Hi Guys,I am going through some strange issue.There is one application hosted behind Cisco ACE 4710 and when application team try to access the application the connection gets dropped exactly after 5 minutes.But when they try to access the applicatio...

Hi,I have configured ACE such way when  Clients will establish a connection using HTTPS (SSL) to the virtual IP address (VIP) configuredon the Cisco ACE.HTTPS causes the client’s TCP session to be encrypted between the browser and the ACE. Once the s...

Hi everyone, I am writing because a have the following case and I need your help. I have a Cisco WAVE 694, and I can't connect to it by telnet, SSH or console. The IP address I am using do not responds to ping. The last network administrator gave me ...

Hi, I need to configure a Cisco ACE 4710 in End-to-End SSL mode and need to know if the ACE for this scenario requires corresponding key pairs or whether it is sufficient with the .crt certificate import. In this manual says that the corresponding ke...

 HELLO EVERYONEI am facing the logs below plz analyse May 22 06:05:21.019 KST: %CWAN_RP-4-SEMAHOG: Process 35 (Serial Background) hogging CCB BLK Sema 4! calling proc 98 (IFCOM Msg Hdlr)-Traceback= 854BDA0 854C4AC A1103CC A17AADC A1111B0 A153060 A10B...

All, Can WAAS process and optimize traffic that is dot1q tagged? Thanks!

Hi All, Some of the switchport are showing amber light even when no cables are connected in N2k Extender.Shut and no shut but still no difference. Can anyone please advise?

hello everyone, I am facing CRC error log twice a day...this issues had occured on module 5 which is WS-X6582-2PAplz analyse this logSLOT 5/0: May 15 11:02:26.736 KST: %CPU_INTF_FPGA-2-INT: Backplane Bus Asic Transmit packet crc error  [sts 0x0 sts1 ...

Hi,So we´ve been having this performance issue, and on the capture I can see that maybe 50% of the DC to Core traffic are Out ot Order and TCP Retransmissions. Cisco Nexus device also shows many of these in the Socket Statistics (does someone know ho...

hi all, I am facing several issues after a few works with Catalyst 4500plz, help with these issues.. 1) SUP redundancy problem  - I configured the redundancy mode as SSO when the device was adopted but now it changed into RPR mode by itself   so I wo...

switch is working fine but garbage data is coming on console hyper terminal.