Application Networking

Hi,I have a customer currently using round-robin SLB on a 11503. They are looking at implementing Dynamic Feedback Protocol (DFP) agents to try to get more granular weighting for LB decisions. Has anyone used DFP, or are you familiar with the agents ...

HelloI had pix+CSM on 6500. I've changed it to new ACE module on 6500.I've made loadbalancing which was done on CSM. Now i wanted to connect dmz which was connected to pix and make static DNAT.I used configuration guide/examples from: http://www.cisc...

Has anyone deployed WAEs in place of the Altiris Name Server/Notification server at a branch site?It looks like the Altiris NS uses TCP and is used for data pre-positioning as well as basic inventory and queries to hosts.I'm working with 2 main offic...

I have a CSS 11506. I have one content rule with two services. If I try to access the servers directly (via real IP address) all goes well and I get access to the web page, if I try to access the web page via the CSS VIP I dont see the web page. You ...

Hi all,Apart from application load balancing the ACE service module also does application accleration and some other features like bandwidth reduction like delta encoding,compression and dynamic browser caching? Is there any configuration examples fo...

HelloWhen i use one probe configured for port 8080 with serverfarm which users realservers port 8080 everything works fine. But i wanted to create one generic probe and use for all of my serverfarms. I hoped that this generic (tcp probe) probe will u...

Greetings, I'm doing a comparison for my management and I need the CIFS and DRE allocation for the above mentioned units. Does anyone know it offhand?I already have the information for the WAE 674, it is 110GB CIFS and 110GB DRE.Thanks,Larry

I understand from the documentation that the "weight" command in a service only affects rules with "balance aca" or "balance weightedrr". Does this also extend to the use of "weight 0" to perform a graceful shutdown of a service? In other words, if...

Hi everyoneWe've just started investigating moving SSL offload to our CSS11501. I've got the configuration working with a single (HTTP) server as per the example configuration at:http://www.cisco.com/en/US/products/hw/contnetw/ps792/products_configur...

i have ace with 5 gig throughput license that is equal to : 1- how many servers 2- how many context how to know the correct throughput for my environment , do i need 4 ,8 or 16 gigthanks

HelloI've created two contexts, allocated administrative vlan to each context, in each context created management class map and policy map (allow all icmp,ssh) and binded it to this vlan. I can ping each context but i can not telnet to port 22 (ssh n...

HiCan anyone confirm if this is a valid configuration or if i require a SSL module.We have a web server at the back of the CSS running http . We are now trying to add https service to this server.I have added the rules to content switch - a service f...