Application Networking

Hi,I have a cache engine 505 in an DMZ, this cache is my proxy-server for my clients at inside network.Now I want to use this cache as a reverse-proxy for my Web Server that is on the same DMZ. All examples at the CCO are using WCCP and CSS, I try to...

Hi,Can anyone help me with this message that is appearing with some frequency on a CE-565 console :%CE-SYS-7-900000: VFS: Disk change detected on device ide1(22,0)Thanks in advance,Ricardo

Could somebody please provide a good source of reference regarding WCCP vesion 2 for Content Delivery Networking. I'm specifically interested in the application and configuration of it.

Some one know the percentage availability or the Up Time of the CSS 11500?

Is there a way to stop one web site from being cached? The customer updates there web page, then goes to it but it shows the old page. Only from inside there network. The outside world sees the updated page. Cache engine Version: ce507-5.0.3Thanks, J...

What's the major difference between LocalDirector and CSS with regards to load-balancing server farms?Thanks

In debugging why random users get an Internet Explorer "page not found" error when connecting through our new content switch to our web servers, I have tracked down the problem from debug logging on the content switch. The error that appears in the...

Does anyone know if one can use a non-dedicated interface (i.e. one through which other traffic flows) for redundancy? I ask this as the pair of 11503's in question will only have the two gig interfaces available, both of their slots filled with SSL...

Hi all,I have a pair of redundant CSS11503 load-balancing two HTTP servers. I need to permit access to specific subset of URLs on those two HTTP servers to anybody on the Internet, while rest of the URLs should be allowed for specific range(s) of IP ...

Hello,I'm looking for the informations about Cisco 5500 switches the limits of CPU and Memory percentage utilization max recommended before having troubles.Many thanks

The documentation states this command is used to designate the interface that is used for GSS keepalive communication. Are these keepalives used for GSS to GSS communication? Or are these keepalives for health checking VIPS? How does this comman...

I have a problem with recognising a service as "Alive" rather than "Dead" on first keepalive attempt after a reboot.The root problem appears to be the fact that the first keepalive that is executed from the "Service" is attempted before the physical ...

I must add an additionnal disk on CE 507. There is any additionnal configurations to do this like re-dimensionning bandwidth allocation for file systems ? Or, the new disk will work well with the previous bandwidth configuration ??Thanks in advance f...