About sheidelbach

sheidelbach · 10-16-2009

Before the big YES, use an external Nexus switch and use VN-Tag. The question is when there is a 3120 in a blade chassis that connects to the ESX hosts that have a 1000v installed on the ESX host. So, first hop outside the ESX host is not a Nexus box...

sheidelbach · 04-30-2009

The base Nexuz 5000 comes with 40 ports that need modules installed in them. I'm looking for a copper solution from the 5K to CNA. With pictures of the cables not very large and detailed, it looks like the copper cable solutions have a built in modul...

sheidelbach · 02-19-2009

I have a lab/test network setup all on WAAS 4.1.1c and needed to do a "restore factory" on a WAE. Now, the Central Manager sees the WAE as unavailable and I can't do a "cms enable" on the WAE to the Central Manager.I receive a "Registration record fo...

sheidelbach · 10-27-2008

OK. This should be easy. I guess I've been concentrating on security to long. :(I have a Cisco 2801 with a HWIC-D-9ESW card in it, and the goal (and I was assured this is possible pre-prechase) would be to have like 2 ports on the card in one VLAN / ...

sheidelbach · 12-31-2007

I've found a lot of good detailed information on configuration of Cisco NAC appliances, and the general functions. But not a good, high-level walk through the steps the appliances/solution handle an OOB deployment for handling new connections to a LA...

sheidelbach · 10-20-2009

Thanks for the follow up.So by private VLANs, are you referring to "PVLAN":"PVLANs: PVLANs are a new feature available with the VMware vDS and the Cisco Nexus1000V Series. PVLANs provide a simple mechanism for isolating virtual machines in thesame VL...

sheidelbach · 01-02-2008

Thanks Mike. Layer-3 OOB.

sheidelbach · 09-30-2007

I've not implemented the solution yet. But I will be using WCCP to redirect the traffic to two appliances, and I will be using one WAE 512card as well. But, that will probably be a month+ from now, as some equipment is on backorder.

sheidelbach · 11-29-2004

Yea, looks like reformating is where I'm going to have to go. I'm looking for the details on that, but thought I would post the question here in case someone knows of a link to the instructions on that

sheidelbach · 09-21-2004

Way cool! Did not notice an ACL as being an option for NAT commands.Waaaaay cool!Thanks!

Member Since	‎10-26-2001 05:11 AM
Date Last Visited	‎08-18-2017 03:50 AM
Posts	66

User Statistics

User Activity

Can a Nexus 1000v be configured to NOT do local switching in an ESX host?

Nexus 5000 - Copper Solution & the SFP-H10GB-CU3M

Can't do "cms register" after "restore factory-default" on WAE

How to configure multiple VLAN / bridge groups on 2801 w/a HWIC-D-9ESW card

Cisco NAC high level flow for Out-of-Band deployments

Re: Can a Nexus 1000v be configured to NOT do local switching in

Re: Cisco NAC high level flow for Out-of-Band deployments

Re: What does the additional 1Gb Mem Module for WAE-512 get you?

Re: VPN 3020 - "Unable to activate IKE Proposal" error

Re: PIX - PATing or not depending on outside interface used