I have a PIX with static's to virtual IP's on my local director. The PIX's embryonic connection limit is 50. My probelm is that the Local Director is sometimes showing a very large number of syn's and the pix shows none.From what I have read the PIX ...
Does anyone know what this log event means? I've tried a few searches on CCO and came up empty. MAR 11 13:07:28 5/1 319 NETMAN-1: TRAP:Authentication:Generated by: x.x.x.xMAR 11 13:07:29 5/1 320 NETMAN-1: TRAP:Authentication:Generated by: x.x.x.x...
What does the port no in the content rule specify is it the port number of the incoming connection or the application port no. and the port number specifed in the service is the application port number if doing only layer 3 load balancing do i need t...
I am trying to use HTTP Header Load balancing but the field we want to use in order to load balance is "user-defined", example HTTP_TOTO = toto1. Do you have any idea on how I could perform this ?Thanks in advance
I have configured one armed configuration on a CSS11050. I have two web servers 10.1.1.1 and 10.1.1.2 with a vip of 10.1.1.3.If one of the Server services fails or put into maintenance mode, the css will not failover to the existing service. the vip...
Hi everyone,we have two CSS11503´s in our network.We have configured VIP and virtual interface redundancy.But after some time on primary CSS the https managment session is not available. The work around for this problem is reboot the CSS.The sec. CSS...
Anyone know how to find the replication status (% complete) for a particular content engine in a Content Distribution Network? Right now I can only see it for channels, so the only way I can see is a work-around -- put the content engines in individu...
Hello,In my network I have some servers that need to access an application on another server. In order to grant redundancy and load balancing I would like to install a second server. As the servers that act as clients and the servers that act as serv...
I'm using a Local Director 416 v4.2.4 and have a problem using http redirect. We were using generic sticky sessions but soon want requests to come via 1 proxied address - SSL sticky doesn't work too well because IE has a habit of creating a new SSLID...
We are using CSS11051 with Cache Flow product for transparent cache function. other URL was cached and operated correctly, howerver, web page only made from PHP3 weren't operated correctly. If I capture the data by analyzer, then, first, SYN signal ...
hiI'm having some problem filtering ospf routes on my css11150. is there any way to block inbound ospf route advertisments (similar to the router ios distribute-list in/out command ??)when the css looses it's default route to the internet through my ...
Hi experts,according to Cisco documentation, CSS pay attention to icmp frame to send it back to the right server. I guess this is done thanks to the embeded Original Datagram. Am I right ?regardsDamien
I understand that SSL is for Secured data encryption, but i want to understand how this can accelerate the process, why i asked this b'cos u call this as SSL accleration????
