Application Networking

Hi,I would like to load balance UDP traffic on 4 IBM-Hosts which are accessed via Frame Relay and X.25 from about 160,000 Terminals. We have about 400 transactions per second. Each transaction consists of 100bytes incoming and 4 Kbytes outgoing. Whi...

Does anyone have a good way to suspend a single physical server if it hosts 100's of services? (Without manually going into each service and suspending it and then re-activating it)? Say you have 10 physical servers that all host the same content. ...

Hi,I want to request a DNS-resolution from a client over a CSS11050-service (VIP-address) to a DNS-Server-farm.I use a CSS11050 and it seems that there happens no PAT for UDP-packets.When I send a nslookup to the VIP-address the packet is translated ...

I have a CSM configured with secure router mode. I need to be able to update the content to the servers using FTP but can't access them without creating a L3 VLAN interface on the MSFC. When I create the VLAN interface, the balancing no longer work...

the problem I am having is that existing connections to a content rule, are remaining persistent even though I have ‘no persistence’ configured in the content rule. What I would like to happen is for existing connections to be reset when the service...

I have a customer with a CSS11503 chassis and a Milan 1000T to 1000SX MMF SC media converter, MIL-C6113SX attached into the copper gig ports.They get a link light on the media converter for the copper interface but cannot poll the switch.Is there any...

My banking corporation is planning to deploy a new web-based financial application in our 300 remote small offices. We want to place a proxy-server with web pages caching in order to reduce traffic between remote and central sites. I'd like to know w...

Does anyone know what IDS Alarm 997 indicate ? What does "route down, route up" mean ? First I thought there was a lost connection from CSPM to IDS, but I still can ping and update between CSPM and IDS. Any advice would much appreciate.Thanks

Making a pop or IMAP connection to the pop.tiscali.be (you can sign up free to test if you want) the connection stops after approx 12minutes.When capturing with a sniffer this connection I receive an TCP RST message from the content rule.When I test ...

Is there a sample CE configuration specific to CSS? Does the CSS use WCCP to communicate with the CE 590?

Hi,I have configured 7204VXR (NPE300) processor with IOS Version 12.1(9) as "ntp server", and the clock settting have not been cleared by system reboot. I remember that the manual clock setting is cleared by reload or power off and on of the device.C...

Dear Currently my local Users browser setting was pointing to this CE and we have another outgiong proxy CE at another location. I had tried the ping to the Outgoing CE and response is pretty good.PING 10.192.0.9 (10.192.0.9) from 10.192.128.8 : 56(8...

Does anyone know what functionality the Session Acceleration Module (CSS5-SAM) actually provides? The documentation is less than clear.Thanks... Steve

Does anyone know how filter function works on CSS ? Can I use the fitler to redirect or prevent the request not to hit my website base on url ?Thanks in advance

Anyone using either the IOS SLB or Cat6k CSMRoute Health Injection (RHI) feature? Can anyoneexplain how this is different than anycast, or is itactually anycast? It appears to be a limited formof anycast to me.http://www.cisco.com/public/cons/isp/e...