Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hievery of my branch office routers (many hundred routers) is connected over its own vlan to our central site (we bought a metro ethernet cloud). At the central site there are two bigger routers talking ospf with all the branch office routers. So the...
Hi,I have some routers with modem-stuff and like to make reverse-access authorization. Router-Cfg:aaa authorization reverse-access default group tacacs+worked under CSU with service=raccess {}But I get errors when I try this under ACS Win 4.1.Router-...
HiI use ACSWin4.1/tacacs+ and I want to restrict shell-users to specific NAS without defining all the NAS on the ACS server. I have only defined very few NAS profiles and the <other>-NAS-profile on the ACS-server because I do not like to maintain tho...
HiI have a cisco 7206 NPE-G1 running 12.3(6) but I do not get the dialer sending a SNMP trap if the dialer changes interface-status.my config:int dialer2snmp trap link-statussnmp-server enable traps snmp authentication linkdown linkup coldstart warms...
Hi,I have a router with multiple nat-outside-interfaces and one inside interface and the following translation:"ip nat inside source static 10.1.1.1 10.2.2.2"Now I get another outside interface (Dialer100) for which I should do a translation of my in...
Kevin,the problem is (in my knowledge) that the command on the central router (branch office) vlan interface is not influencing the routing decision of the branch office router. The branch router only inspects the costs of the links behind the local...
Maybe my question was not clear enough or I should not mention "load-balancing" in my question.We do not want a load-balancing of the traffic of one branch office. You already mention some reasons for that -> Voice,QoS.I want that each branch office ...
Maybe I should not mention the word "load-balancing" in my question.I do not want to load balance traffic from one branch office between the two central routers!Every traffic from one branch office should always go through the same central router.Eac...
Thanks Jeff,I already got your detailed information from your colleague at Cisco (Markus K.)And it works.Maybe you can also help me for:Security / AAA / Restrict User to specific NAS if only default NAS profile is configuredhttp://forum.cisco.com/efo...
