Best practice SSL End-to-End in Exchange 2010 CAS loadbalancing

[DionbenHendriks]

Hi,

I was wondering if there is a best practice for deploying SSL End-to-End in Exchange 2010 CAS loadbalancing.

We have ACE modules A5(1.1) and ANM 5.1(0), although there seems to be a template available in ANM it doesn't work. It throws a error when deploying, i believe the template is corrupt.

As I am undersome pressure to deploy this asap I am looking for a sample config. I found one for SSL offloading, but I need one for End-to-End SSL.

Thanks in advance,

Dion

[pablo.nxh]

Hi Dion,

You can open up a case with TAC to have that template reviewed and confirm if the problem is at the ACE or ANM side.

In the meantime here is a nice example for End-To-End SSL that can help you to get that working:

http://www.cisco.com/en/US/products/hw/modules/ps2706/products_configuration_example09186a00809c6f37.shtml

For CAS load balancing there's nothing special other than opening the right ports, I'd advise you to get SSL working first and take it from there, if any problem comes up you can post it here and we'll give you a hand.

HTH

__ __

Pablo