08-08-2012 02:17 AM
Hi Experts;
Requirement is to have requests from outside as well as inside from different vlan Server to our Production Servers.At present all requests are coming from inside vlan via policy-map multi-match L3_XYZ. See Example below
policy-map multi-match L3_XYZ
class L3_PROD
loadbalance vip inservice
loadbalance policy L7_PROD
loadbalance vip icmp-reply active
policy-map multi-match L3_OUTSIDE
class L3_PROD
loadbalance vip inservice
loadbalance policy L7_PROD
loadbalance vip icmp-reply active
Many thanks
Regards
Solved! Go to Solution.
08-08-2012 03:24 AM
Hi Hidayat
yes, class map alone doesn't have any deep meaning and can be reused in many policy maps. Actually policy maps can be reused too, so in your particular example you can put the same policy map on 2 different interfaces. (Sometimes it's a good idea, if requirements are the same for traffic coming from both interfaces or if requirements are diffrent - it's better to create a new one, but class-map definitely can be reused.)
08-08-2012 03:24 AM
Hi Hidayat
yes, class map alone doesn't have any deep meaning and can be reused in many policy maps. Actually policy maps can be reused too, so in your particular example you can put the same policy map on 2 different interfaces. (Sometimes it's a good idea, if requirements are the same for traffic coming from both interfaces or if requirements are diffrent - it's better to create a new one, but class-map definitely can be reused.)
08-08-2012 04:31 AM
Thanks Borys,
I will test in a day or two and will reply with the result.
Many thanks
Regards
08-09-2012 10:28 AM
Hi Borys,
Thanks for your answer, indeed it worked perfect for me.
Regards
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide