12-09-2013 12:26 AM
Hi;
Is there any tool for reporting on csm module reals/vservers etc. connections between given time periods ?
If not , may i export these values with any commands from cli ?
Thanks
Umut
12-09-2013 04:36 AM
Hi,
You can use any SNMP tool to monitor CSM using SNMP MIBS.The Cisco CSM supports two Read Only MIBs: CISCO-SLB-MIB and CISCO-SLB-EXT-MIB, which are available at ftp://ftp.cisco.com/pub/mibs/.
Traps can be sent based on real server, virtual server, and fault tolerant state changes. This is an old product and not much options are available SNMP wise.
While searching more related to this TOPIC i found a similar discussion. Kindly go through it and see if it helps you.
https://supportforums.cisco.com/thread/2024621
The CSM also allows you to confiure TCP scripts for HM and other particular tasks. Please have a look at the link below for details regarding the scripts:
Regards,
Kanwal
12-11-2013 05:42 AM
Thank you for your reply.
I think we need to change load balancer infrastructure asap.
12-11-2013 05:44 AM
Hi,
Yeah they have been end of life for a while now and end of software engg support too.
Regards,
Kanwal
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide