Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hi all,We're using Catalyst 9800 cont. and 801.x peap with ldap username on one of ssid profile. Unfortunately ,some users gave their credentials to others and they logon same username/password.Is there any way to prevent this ? Best regards
Hi,We are trying to upgrade environment wlc5508 to 9800. On dot1x related wlans we have issues. we use microsoft nps for radius. Regarding to 9800 AAA document we made configurations but although radius server seems up (form cli "sh aaa servers" comm...
Hi,We use 2700 series ap with Cisco 9800 controller. In 5ghz network, we suspect dfs issue on the user side. we looked for on gui but not successful.So we need to find cli commands regarding to ap dfs scanning/radar scanning status summary and relate...
Hello;We trying to fix bootflash corruption but one of stage we had switch(boot)# format bootflash: check-filesystem This command is going to erase the contents of your bootflash:.Do you want to continue? (y/n) [n] ySorry, user root is not allowed to...
Hi;In our environment we use 1800,2800,2700 series ap on 8.3.143.0 software. So we use standart bundle software. Now we supply four 1532 series outdoor ap. According to release notes for registering 1530 series we have to install different ap package...
Actually profile has wpa2/wpa3 , 802.1x, aes settings also on AAA tab i'm using NPS server for authentication for ldap users on active directory. This ssid only using for users own android/ios devices internet connection because of this i prefer pe...
same environment cisco 9800 and nps server as a radius side.and taking similer logs like;May 7 20:43:24: %SESSION_MGR-5-FAIL: Chassis 2 R0/0: wncd: Authorization failed or unapplied for client (0028.f88f.63f3) on Interface capwap_90000005 AuditSessio...
Hi,I read the docs and watch the video but still no progressing between nps and 9800. meanwhile i captured debug from client when trying to connect. i couldnt find out what am i missing..please find attached filebest regards
thank you, especially "show ap auto-rf dot11 5ghz" was very useful when we combine with debug logs including "Radar Detection on active channel" info.best regards.
