07-25-2012 07:36 AM
Currently we have a Cisco ACE 4710 doing a lookup for an image on a website to determine whether the site is available or not. Is there any way to get the ACE to query the server (probably using SNMP) and failover if the server's processor stays above 90% for more than 5 minutes?
Thanks in advance
07-30-2012 01:29 AM
Hi,
You can configure SNMP based probes for checking processor utilization. You need to know OID's of the processor and that should be do it. I would suggest looking at the config guide for more details. Haven't done it myself. I am not sure about the time frame of 5 minutes but you can configure a threshoold limit crossing which probe will fail.
Regards,
Kanwal
07-31-2012 07:42 AM
there is an example in the configuration guide :
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide