Hello All.
I Have the following error trying to upgrade the NX-OS in my N3K-C3064QP-10GE
test1# copy tftp://192.168.0.130/n3000-uk9.6.0.2.U6.5.bin bootflash:n3000-uk9.6.0.2.U6.5.bin
Enter vrf (If no input, current vrf 'default' is considered): management
Trying to connect to tftp server......
Connection to Server Established.
TFTP get operation failed:Undefined error code (2)
test1#
(((((((((((((((((((((((((((((((((((((((((((((((((((( show ver )))))))))))))))))))))))))))))))))))))))))))))))))))))))
test1# show ver
Cisco Nexus Operating System (NX-OS) Software
TAC support: http://www.cisco.com/tac
Documents: http://www.cisco.com/en/US/products/ps9372/tsd_products_support_serie
s_home.html
Copyright (c) 2002-2014, Cisco Systems, Inc. All rights reserved.
The copyrights to certain works contained herein are owned by
other third parties and are used and distributed under license.
Some parts of this software are covered under the GNU Public
License. A copy of the license is available at
http://www.gnu.org/licenses/gpl.html.
Software
BIOS: version 2.5.0
loader: version N/A
kickstart: version 6.0(2)U2(4) [build 6.0(2)U2(3.6)]
system: version 6.0(2)U2(4) [build 6.0(2)U2(3.6)]
Power Sequencer Firmware:
Module 1: version v4.1
BIOS compile time: 06/27/2013
kickstart image file is: bootflash:///n3000-uk9-kickstart.6.0.2.U2.4.bin
kickstart compile time: 4/15/2014 0:00:00 [04/15/2014 09:41:11]
system image file is: bootflash:///n3000-uk9.6.0.2.U2.4.bin
system compile time: 4/15/2014 0:00:00 [04/15/2014 12:39:41]
Hardware
cisco Nexus3064 Chassis ("48x10GE + 16x10G/4x40G Supervisor")
Intel(R) Celeron(R) CPU P450 with 3785072 kB of memory.
Processor Board ID FOC16027UXW
Device name: test1
bootflash: 2007040 kB
Kernel uptime is 0 day(s), 0 hour(s), 35 minute(s), 9 second(s)
Last reset at 295473 usecs after Wed Oct 26 00:11:01 2016
Reason: Reset Requested by CLI command reload
System version: 6.0(2)U2(4)
Service:
plugin
Core Plugin, Ethernet Plugin
test1# show int mgmt 0
mgmt0 is up
Hardware: GigabitEthernet, address: 547f.ee74.4b60 (bia 547f.ee74.4b60)
Internet Address is 192.168.0.249/24
MTU 1500 bytes, BW 1000000 Kbit, DLY 10 usec
reliability 255/255, txload 1/255, rxload 1/255
Encapsulation ARPA
full-duplex, 10 Mb/s
EtherType is 0x0000
1 minute input rate 1192 bits/sec 1 packets/sec
1 minute output rate 112 bits/sec 0 packets/sec
Rx
75400 unicast packets 1568 multicast packets 3543 broadcast packets
80511 input packets 42765466 bytes
Tx
75401 unicast packets 126 multicast packets 2 broadcast packets
75529 output packets 3802469 bytes
test1#
test1# show vrf management
VRF-Name VRF-ID State Reason
management 2 Up --
test1#
if someone can help me to fix this issue. Thank you.
