configure load balance in css11500

[julxu]

tried configure simple http pool for load balance as following, please advice me what I did wrong?

circuit vlan10

ip address 10.1.1.1 255.255.255.0

service http

ip address 10.1.1.2 range 10

protocol tcp

port 80

active

owner WEB

content HTTP

vip address 192.168.1.1

protocol tcp

port 80

add service http

active

and the I can not get web server in test subnet.

Any comments will be apprecated

Thanks in advance

julxu

[Gilles Dufour]

do you have only 1 vlan ?

If so, the problem is the return traffic from server to client.

This traffic must go through the CSS.

So, the server must use the CSS as default gateway or you need source nating or policy routing.

Also verify traffic is hitting your content rule with the command 'show summary'

Regards,

Gilles