Configuring CSM and SSL module on Catalyst 6506

[iraira]

Hi there,

i need some help with the following scenario.

Catalyst 6506 with CSM and SSL module.

We want to balance https traffic. Solutin has to be end to end traffic encryption, thus, form client to physical servers.

I have check doc and find doc

http://www.cisco.com/application/pdf/en/us/guest/products/ps708/c1581/ccmigration_09186a00804411e3.pdf

where scenaroi is described in pa b16.

I 'm a little confused since it seems to me that some configuration issues are missed or assumed,

Could anybody clarify scenario & conf ?

Thx a lot

[iraira]

We are trying to balance HTTP & HTTPS traffic to teh same physical servers.

WWW load balnace is working but not https.

Vip is the same for both kinds of traffic.

The main issue is that hhtps traffic has t reach physical servers in encrypted mode.

Thus a 2 ways decryption/encryption process has to take place between CSM & SSL modules.

We ha checked and https traffic reaches server, but the reply does not reach the client.

Can anybody help ?

Atthachments are available (csm.txt and ssl.txt)