Configuring customized ldap ports on cisco load balancer

[CSCO11061734]

Hi,

I have configured ldap on a different ports than the 389 and 636.  How do I configure this port to be allowed on the Cisco load balancer.  I'm a newbie to cisco load balancer.  Is there any specific configuration to be followed to set the customized port on the load balancer ?

Any help is appreciated.

Thanks in advance

[Kanwaljeet Singh]

Hi,

By default, ACE denies all traffic coming to an interface and you need to define ACL's to allow traffic. You can define an extended ACL to allow the traffic from IP's, TCP/UDP ports etc. Please visit the below for details about ACL configuration on ACE.

http://www.cisco.com/c/en/us/td/docs/app_ntwk_services/data_center_app_services/ace_appliances/vA3_1_0/configuration/security/guide/securgd/acl.html#wp1018359

Also, pasting another link for basic TS related to ACE.

http://docwiki.cisco.com/wiki/Cisco_Application_Control_Engine_(ACE)_Troubleshooting_Guide_--_Troubleshooting_Access_Control_Lists

Regards,

Kanwal