cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
389
Views
2
Helpful
1
Replies

configuring one armed CSS for a service

gpangallo
Level 1
Level 1

Hi,

I would like submit to you a problem regarding the configuration of services in the server side but the source is located on the same subnet.

I think to configure on the CSS another internal VIP on the same subnet and a group associate to this VIP with the destination services like this:

"

group internal

vip address 10.1xx.x.x

add destination service int_1

add destination service int_2

active

"

Moreover we also configured a content rule associate to this VIP.

On the same CSS there are other services and rules configured pointing to external VIPs (the source is outside the server farm).

I would like to know if that configuration is correct or did I forget anything?

If it's wrong, there is an alternative configuration (es. using external VIP?)

Let me know something.

Thank you very much.

Best regards.

Giuseppe

1 Reply 1

owillins
Level 6
Level 6

I think your configuration is looking good , better you can use this CSS Advanced Configuration Guide (Software Version 6.10) Configuring VIP .

http://www.cisco.com/en/US/docs/app_ntwk_services/data_center_app_services/css11000series/v6.10/configuration/advanced/guide/VIPRedun.html