Application Networking

cancel
Showing results for 
Search instead for 
Did you mean: 
cancel

Cisco UCS X-Series Energy Efficiency Offer

 

Forum Posts

We have two CSS running in box to box redundancy in two-arm (router mode) on code 8.10.40. Master is running with ip redundancy master (causing it to always be master if it is up and running). We had a need to reload a previous configuration. To do t...

aanelso1 by Level 2
  • 846 Views
  • 1 replies
  • 0 Helpful votes

we configured http-head keepalives on GSS, but get no positive answer. therefore the question: is there any possibility to check the http-head request manually from the GSS, like on CSS with "icp probe host <ip> "<html site>" <port> thx in advance

Resolved! WAE Buffer Sizes

I recently read an article on the best buffer sizes (optimized and original) to configure a WAE device for based upon its model type. I have several dozen 502s within my environment, but have just noticed that my buffer size setting is applied to all...

richianaj by Level 1
  • 978 Views
  • 2 replies
  • 0 Helpful votes

After upgrading to 4.0.17, I noticed that there is now a 'test self-diagnostics all' command. After running this on my 612 Edge WAE, I received the following warnings:Test WARN [tfo] WARN ASYMMETRIC Asymmetric routing is seen in the device Action: Ch...

Hi, we are in the process of re designing our datacenter lan and we plan to introduce ACE to perform loadbalancing and routing function between the layers (currently we use MSFCs in our 6500s). Currently we use NAM to harvest the netflow data from MS...

t814687 by Level 5
  • 1721 Views
  • 1 replies
  • 0 Helpful votes

I have a requirement for the servers behind my CSS to access the internet. Currently I have ecmp enabled with two default routes specified. Is there anyway I can specify that when the servers initiate traffic out to the internet, that they only use a...

ccanning by Frequent Visitor
  • 797 Views
  • 3 replies
  • 0 Helpful votes