cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
434
Views
0
Helpful
4
Replies

CSM-S time/date

orbana
Beginner
Beginner

I noticed that the CSM module uses different time/date settings than the router.

Is there a way to synchronize the CSM's clock to the router.

Thanks,

Attila

dplexdmz-6509-1#sh clock

11:29:17.246 CET Fri Feb 17 2006

dplexdmz-6509-1#sh mod csm 1 probe real

real = 192.168.7.48:80, probe = APOLLOTEST, type = script,

vserver = TEST, sfarm = TEST

status = OPERABLE, current = 11:06:26 CET 01/17/70,

successes = 3714, last success = 11:06:31 CET 01/17/70,

failures = 211, last failure = 00:51:33 CET 01/17/70,

state = Server is healthy.

script APOLLO

last exit code = 5000

last error: 65534

error info: couldn't open socket: connection refused

while executing

"s

4 Replies 4

colin.mccrory
Beginner
Beginner

I have enabled ntp on the cat6k using a server as the source and the CSM has synchronised to the system clock. This is also true for the SSL daughtercard on a CSM-S.

The router and the SSL daughtercard is already configured to use NTP (I forgot to mention). If CSM logs to the system log uses the correct time. The anomaly is visible only with some commands (sh mod csm 1 tech all, sh mod csm 1 probe real etc.)

Regards,

Attila

do you have the command "clock calendar-valid".

This is required for the CSM to synch with the MSFC.

Gilles.

Thanks. I added "clock calendar-valid" to the configuration but the problem still exist. Do I need to reset the CSM?

Attila

Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: