06-03-2002 02:06 AM
Hello,
my customer has configured a sorry for his server. If the normal server is down the Sorry Server receives the requests. That works fine. But if the normal server comes back the Sorry Server still receives some requests( 2 hours and more). Has anybody an idea what might be the reason for that ?
regards
Dietrich Schleyer
content webserver
add service server12
vip address 10.40.52.20
primarySorryServer server13
protocol tcp
port 80
url "/*"
no persistent
active
service server12
ip address 10.40.52.12
port 80
protocol tcp
keepalive type named applicationwww01
active
service server13
ip address 10.40.52.13
protocol tcp
port 80
keepalive type named applicationwww02
active
keepalive applicationwww01
ip address 10.40.52.12
port 80
type http non-persistent
uri "/test.html"
frequency 10
method get
active
keepalive applicationwww02
ip address 10.40.52.13
port 80
uri "/test.html"
frequency 10
method get
type http non-persistent
active
06-11-2002 12:38 PM
According to: http://www.cisco.com/warp/public/117/css_sorry_server.html After the CSS 11000 directs requests to a primary sorry server, the switch will continue to use the primary sorry server even when the original server becomes functional. To force the connection back to the original server, you must suspend the primary sorry server or wait until the connection is dropped or times out. When a new session is initiated by the CSS 11000, the connection should go back to the original server.
06-20-2002 03:22 AM
Hello
This behaviour comes from a buggy IOS Image.After upgrading it works very fine.
07-31-2002 10:46 PM
Which are the buggy IOS???
Which IOS works fine???
Thank you in advance
03-11-2003 03:23 AM
Do you have a IOS which works fine.
I Have the same problem, what can I do?
Best regards Rene
03-17-2003 04:38 AM
Hello
I have a version ap0500071s.Thats solves the problem.
Best regards Michael
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide