11-04-2004 04:15 AM
Is it only possible to have VIPS defined that are part of one if the defined interfaces / circuits.
I have an external and internal interface on the CSS with respective subnets allocated. I want to setup a VIP based on a different subnet and have the CSS LB to real servers within one of the locally connected network subnets.
Hope this makes sense
11-04-2004 06:23 AM
The VIP addresses aren't required to be part of a configured circuit subnet.
~Zach
11-05-2004 12:30 AM
Do you mean that the VIP does not have to be an IP within either of the circuit Vlan's associated with a port on the CSS.
If so, how does traffic get to the CSS...do you just route it from above down to the IP ?
11-05-2004 05:50 AM
That's correct - I tested in the lab. To get traffic to the CSS (for the VIP address), you would need to add a route at the hop before the CSS on the client side.
~Zach
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide