Application Networking

Hi all. I hope my question is not too simplistic.I am a rather newbie to the concept of Content Delivery products and services. My company, in the past, has used BGP to ensure that our traffic fails over to our DRP facility in the even of a disaster....

Hi,What is the Cisco position when it comes to choose the best site, based on network proximity with a GSS? The GSS version 1.2 allows Boomerang/CRA and the new network proximity method that uses DRP. Question : Which one is the preferred method ?I d...

I have prepositioned content which customers access through a url. Is there a way to get this content to start streaming as soon as they click on the url or does it have to download the whole file to the customer's pc before the customer can view the...

Hi, Could someone shed some light on how this is possible and what would it entail. I am just curious on how video is being delivered over ip to homes. Say for example a solution which would allow live content to be sent to homes or even pre-recorded...

Would anyone advise me which SNMP MIBs can be used to monitor the CSS resource in term of:(1) Simulataneous Sessions(2) Simulataneous Flows Per System

Does anyone know where I can find information about how to interpret the output of "show error" on the Localdirector?thload1# show error 0: 40205 1: 0 2: 0 3: 0 4: 0 5: 0 6: 0 7: 0 8: Thanks!

I have 2 Localdirector 430's configured for failover. I would like to eliminate an old hub which is between the LD's and the switch. When I do so, "show failover" never shows as everything working. The switch is a 2948G-L3 using BVI's on the ethernet...

I use Transparent Caching,and specifyed an EQL which include jpeg gif etc.there is no dynamic content like asp in EQL.but when i use show content conmmand on css i found there are some dynamic content,like this: SFP: 1/1 Index: 40 <2.1.22.8> TCP Port...

HelloI need to let a keepalive script store a variable so that the next time the keepalive script is run, the variable can be read and used. A session variable is apparently not "permanent" when it is created in a keepalive script. Does anyone have a...

Hello,I have just two questions regarding CSS11501-3.1. I find in the 'CSS Redundancy Guide' that it is possible to configure up to 255 VRs per VLAN. If I understood it correctly, then I can assign 255 VIPs(content rules) to a GigE interface (circuit...

Hi,I get the following message when I try to activate a ssl-server list:%% Error sending config to fortune, service not activatedThe config is:ssl-proxy-list test description "test" ssl-server 1 ssl-server 1 vip address x.x.x.x ssl-server 1 cipher rs...

Hello,i try to add this route in vlan of CSMvlan 100 client ip address 10.192.96.19 255.255.255.0 >route 10.0.0.0 255.0.0.0 gateway 10.192.96.10 >alias 10.192.96.18 255.255.255.0But don't work.Only work when i put this routesvlan 100 client ip addres...

My understanding is that the CSM only has a 4Gbps connection to the backplane of the 6500. Does this also mean I am limited to 4Gbps throughput to all of my load balanced servers? This seems pretty limiting considering the capacity inherent to the 65...