10-06-2006 05:26 AM
The CSS installation I've inherited is working fine load-balancing web content to the outside world.
It has one physical ethernet connection but NO interface definition statements and only 1 circuit defined - vlan 1 - with a single IP address.
I'd really like to know how this setup works, but can't find it explained in ANY of the manuals...
Solved! Go to Solution.
10-06-2006 05:55 AM
by default, all physical interfaces are in bridge vlan 1.
This is why it works.
If the circuit vlan was using a different vlan id than 1, you would have to configure a physical interface to be in this particular vlan.
Gilles.
10-06-2006 05:55 AM
by default, all physical interfaces are in bridge vlan 1.
This is why it works.
If the circuit vlan was using a different vlan id than 1, you would have to configure a physical interface to be in this particular vlan.
Gilles.
10-10-2006 02:58 AM
Thanks for that. Now I understand. How did you discover it - thought I'd looked everywhere.
10-10-2006 04:33 AM
I'm just a software engineer for the CSS and after 4 years working with this product, I learned a few tricks :-)
Gilles.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide