Hello All,
If anyone can help with this sticky situation I'd appreciate it.
I have a customer with a CSS11501. He does not have an SSL module installed.
He has 2 blade servers, when he adds a web site, which is accessible over SSL, the CSS load balances client requests causing lost sessions, mostly lost pop-ups, it does not want stick to the same server.
I've configured the following:-
service web1
protocol tcp
port 443
keepalive type tcp
ip address 192.168.200.50
string web1
active
service web2
rotocol tcp
port 443
eepalive type tcp
ip address 192.168.200.51
string web2
active
*******************
content SSL_Web
add service web1
add service web2
rotocol tcp
port 443
vip address 1.2.3.4
application ssl
advanced-balance sticky-srcip-dstport
active
*********************
group web_Farm
add service web1
add service web2
vip address 1.2.3.4
active
I was attempting to get the client to stick to the server but unfortunately, this didn't work, the CSS seems to continue to send requests to both servers and they are getting scripting errors.
Once the customer turns off the second blade, all is ok.
I did try adding the string value to the service and configuring 'advanced-balance arrowpoint-cookie' in the content but the clients were unable to reach any web sites.
Best Regards Tony
