Enable HTTP metadatacache caching

[Dan Loring]

On our current configuration we do not have this enabled.  We are running version 4.2.3c build 1.   Are we cuurent enough to enable this?  I was reading that you need 4.3 for this to work? Should we be up to a later version?

[chdevcha]

Hey Dan,

After looking through the config guide, you should be able to configure HTTP metadata caching in WAAS 4.2.x+.

Review these config guide pages, which show where/how to configure HTTP (and HTTPS if applicable) metadata caching:

WAAS 4.2.x

http://www.cisco.com/en/US/docs/app_ntwk_services/waas/waas/v421/configuration/guide/policy.html#wpmkr1093630

WAAS 4.3.x

http://www.cisco.com/en/US/docs/app_ntwk_services/waas/waas/v431/configuration/guide/policy.html#wpmkr1093630

WAAS 4.4.x

http://www.cisco.com/en/US/docs/app_ntwk_services/waas/waas/v441/configuration/guide/policy.html#wpmkr1093630

Hope this helps!

-Chet