03-12-2012 08:40 AM
On our current configuration we do not have this enabled. We are running version 4.2.3c build 1. Are we cuurent enough to enable this? I was reading that you need 4.3 for this to work? Should we be up to a later version?
03-24-2012 08:01 PM
Hey Dan,
After looking through the config guide, you should be able to configure HTTP metadata caching in WAAS 4.2.x+.
Review these config guide pages, which show where/how to configure HTTP (and HTTPS if applicable) metadata caching:
WAAS 4.2.x
http://www.cisco.com/en/US/docs/app_ntwk_services/waas/waas/v421/configuration/guide/policy.html#wpmkr1093630
WAAS 4.3.x
http://www.cisco.com/en/US/docs/app_ntwk_services/waas/waas/v431/configuration/guide/policy.html#wpmkr1093630
WAAS 4.4.x
http://www.cisco.com/en/US/docs/app_ntwk_services/waas/waas/v441/configuration/guide/policy.html#wpmkr1093630
Hope this helps!
-Chet
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide
Log in to Community