I have one GSS but no Application Content Switch, Application Control Enginer or IOS SLB device. Would it be possible that GSS can probe (check the server status using ICMP and TCP) directly from Servers...
If yes, then what are the probes available with servers..
Use an ICMP keepalive when testing a GSS answer that is a VIP address, IP address, or a virtual server IP address. The Internet Control Message Protocol (ICMP) keepalive type monitors the health of resources by issuing queries containing ICMP packets to the configured VIP address (or a shared keepalive address) for the answer. Online status is determined by a response from the targeted address, indicating simple connectivity to the network. The GSS supports a maximum of 750 ICMP keepalives when using the standard detection method and a maximum of 150 ICMP keepalives when using the fast detection method.
According to your reply, it is confirmed that Direct ICMP probes to Server IP Address are possible. May I know that Direct TCP probes to Server IP Address are possible, like I want to check the status of Web Service (www)?
ACI Fabric start learning external remote IP’s locally on the Leaf switches . Due to this reason, traffic is locally dropped on Leaf Sw03 instead of going outside the fabric. This issue basically interrupted most of the External & Internal services be...
Transforming Day 2 Ops with Cisco Data Center Network Assurance and Insights
Live webinar: Network Insider Series
Wednesday, July 15, 202010:00 AM Pacific Standard Time (San Francisco, GTM -08:00) Driven by the growth of applications, deluge of data and t...
Hi All,i am going to deploy Hyperflex with Vmware for Testing Purposes.Are there CLI commands to do a factory reset of a new Hyperflex system and rebuild hyper flex again?is there any procedure for rebuild Hyperflex?