Application Networking

I am using 4.1.1c(build b16), and testing restricting access to the SNMP MIBS. we are running inline with a separate interface for mgmt. (gi1/0). with snmp access-list defined and snmp-server access-list set.snmp-server community publicsnmp-server ac...

Hello Does it work? Is it possible to poll the alias IP address in HA? I have tried and it does not seem to work. The moment I change to the interface IP at the management console, it starts working so the policy is ok. Any advice? If it is not possi...

Hi, I currently have sticky and cookie insert as a layer 7 process. I would like to know if I can configure sticky and the cookie insert as a layer 4 process to consequently improve performance?My current config:class-map type http loadbalance match-...

How can I use ACE device manager. I have vlans defined on ACE in bridged mode. How can the management interface be defined on ACE. Please provide an example if possible. Thank you.

I am trying to define a probe with request method in non-admin context. The option is however not available. Could someone please state that what all configurations used in Admin context can also be applied in the non-Admin context. Is there any tabl...

please see the attached diagram, 1 pair CSS need to be shared by 2 vlan: vlan 10 and vlan20, in order to get better performance, we will configure A/A ASR, can we configure ASR as in the diagram (assuming group will be configured in layer 2 CSS)?

Hi, What would be a resonable initial sticky percentage? I started with 5% on the following command syntax:resource-class prodlimit-resource sticky minimum 5.00 maximum unlimited I haven't had the opporunity to allocate my resources as needed because...

Hi All, I tried to use the attached TCL scrpits for probing. My servers are listening on port 8010. But the probe failed, its getting the error "Internal error: Script error" .Could anyone please verify the attached script ?RegardsAslam ..

There is an option to specifically define the CIFS mss within the WAAS command line. Is this option not inherited from the Global TCP settings? Why is there a separate parameter? Thanks.

still facing some problem and need someone help me find out where the problems are:please see the attached diagram: 2 syslog servers have DG to 10.122.70.15, which is the VIP in CSS, CSS use layer 3 approach, and configure default route point to 10.1...

Hi all,may you have any idea about a complex regexp for summarize this?http://foo1(any number beetween 1 and 999):(port between 80 and 65553)/bar/bard_(ai|bi)/somethingthk a lotDas