cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
696
Views
0
Helpful
1
Replies

gss image upgrade

julxu
Level 1
Level 1

greeting,

I have tried to upgrade image version from 2.0(2) to 3.0(2) for my GSS4492R.

according the gss upgrade doc for version 3.0 I did:

gss4492r#gss stop

gss4492r#install gss-3.0.2.0.0-k9.upg

File: gss-3.0.2.0.0-k9.upg

Size: 190720041

Md5sum: 3f1e74d26dc0e4fcaae4759b574009c9

Proceed with install (the device will reboot)? (y/n): y

Performing software install. This will take a few minutes.

If you close this session, the installation will still complete.

% Upgrade failed: The install script from the upgrade file failed.

% The GSS is not running.

It seems can not upgrade for me. Could I get some advice about the problem?

Any comment will be appreciated'

Thanks in advance

1 Accepted Solution

Accepted Solutions

andrew.burns
Level 7
Level 7

Hi,

You can't upgrade from 2.0(2) to 3.0(2) directly, as there is an intermediate upgrade required.

See this link about the sequence:

http://www.cisco.com/en/US/docs/app_ntwk_services/data_center_app_services/gss4400series/v3.0/administration/guide/Upgrades.html#wp1010257

HTH

Andrew.

View solution in original post

1 Reply 1

andrew.burns
Level 7
Level 7

Hi,

You can't upgrade from 2.0(2) to 3.0(2) directly, as there is an intermediate upgrade required.

See this link about the sequence:

http://www.cisco.com/en/US/docs/app_ntwk_services/data_center_app_services/gss4400series/v3.0/administration/guide/Upgrades.html#wp1010257

HTH

Andrew.

Review Cisco Networking for a $25 gift card