01-27-2011 10:04 AM
Hi Guys,
We are currently working out if there is a way to load balance specific subnets to a specific rserver within a server farm behind the one VIP.
For example (all Rservers within one serverfarm Serv_farm001):
Subnet 10.10.10.0/24 load balance to Rserver A ( with Rserver B as backup )
Subnet 20.20.20.0/24 load balance to Rserver B ( with Rserver A as backup )
I can see from the configuration guide that you could maybe use sticky src IP to do this, but I haven't seen anything to confirm this.
Any takers on this, I'm sure it would be a familar common thing that others are doing out there?
Looking fwd to the responses!
Cheers
R
01-27-2011 10:33 AM
Hi Rob,
You can either do this on the incoming-interface ACL or for easier management you can do the following:
class-map type http loadbalance match-any Subnet-A
2 match source-address 10.10.10.0 255.255.255.0
class-map type http loadbalance match-any Subnet-B
2 match source-address 20.20.20.0 255.255.255.0
policy-map type loadbalance first-match SLB
class Subnet-A
serverfarm A
class Subnet-B
Serverfarm B
HTH
__ __
Pablo
02-14-2011 04:23 AM
Hi Pablo
Thanks for the infor, not sure if we will implement this, so will let you know how we go if we decide on it!
Also sorry about the late reply, a few wks of holidays!
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide