cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
2336
Views
0
Helpful
3
Replies

is it possible to log in to ACE module on 6509

gargolek99
Level 1
Level 1

Hello,

 

We have run into the issue where we are unable to log in to ACE which is module on 6509 from outside. Is it possible to log in to ace module from switch itself from 6509?

I have tried remote login and remote command nothing worked...?

Any help would be appreciated.

 

Regards,

1 Accepted Solution

Accepted Solutions

Kanwaljeet Singh
Cisco Employee
Cisco Employee

Hi,

Did you try "session slot x processor 0". X would be the slot in which you have ACE module. Show module on switch should show that.

If the ACE is in ROMMON mode you can follow the below link for remote login and boot.

http://docwiki.cisco.com/wiki/Cisco_Application_Control_Engine_%28ACE%29_Troubleshooting_Guide_--_Troubleshooting_ACE_Boot_Issues

 

Regards,

Kanwal

View solution in original post

3 Replies 3

Kanwaljeet Singh
Cisco Employee
Cisco Employee

Hi,

Did you try "session slot x processor 0". X would be the slot in which you have ACE module. Show module on switch should show that.

If the ACE is in ROMMON mode you can follow the below link for remote login and boot.

http://docwiki.cisco.com/wiki/Cisco_Application_Control_Engine_%28ACE%29_Troubleshooting_Guide_--_Troubleshooting_ACE_Boot_Issues

 

Regards,

Kanwal

gargolek99
Level 1
Level 1

That worked thank you so much for quick help.

 

Regards,

Hi,

I am glad it helped you.

You are welcome!

Regards,

Kanwal

Review Cisco Networking for a $25 gift card