Local Director SNMP

[bkurian]

below is the sh snmp output from my local director. I run snmpwalk and it coudn't connect to the device. Do i miss something..I basically want to enable SNMP on local director to view the bandwidth..

snmp-server host 10.X.X.X

no snmp-server enable traps

snmp-server community public

snmp-server contact Test

snmp-server location LOCATION

[seilsz]

What version of SNMP are you using? The LD only responds with SNMPv2 (even if you send it a v1 request).

~Zach

[bkurian]

I tried both version 1 and 2...no response...

tried from Mandrake 10.snmpwalk -c public 1.1.1.1

and no response..any idea?

[seilsz]

Your configuration is correct. Is it possible that it is some other issue (routing back to the host, etc.)?

~Zach