cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
1234
Views
0
Helpful
3
Replies
Beginner

Looking for the Proper WAAS Upgrade Path

          A while back I started upgrading some of our WAAS 274/574 devices and once I got halfway through I relized I was on the wrong path to get the devices to accelerate and compress Native ICA for our Citrix sessions.

So Currently I have half our devices at 4.3.3c and the other half at 4.4.7 

So my questions are....

What is the latest greatest version that I should be at for Native ICA Acceleration?

What is the best upgrade/downgrade path I should take to get there?

3 REPLIES 3

Looking for the Proper WAAS Upgrade Path

We are quite happy using 5.2.1 and 5.3.1.

Even we are not using ICA i think there is no problem upgrading to 5.3.1 from 4.3 or 4.4

Enthusiast

Looking for the Proper WAAS Upgrade Path

Dan,

It is recommended/required to run 4.2.1 (or a later version) before you install Version 5.3.1

You cannot upgrade from 4.0, 4.1, or 4.2 to 5.3.1 since it is NOT supported

Here you have a link about it:

http://www.cisco.com/en/US/docs/app_ntwk_services/waas/waas/v531/release/notes/ws531xrn.html#wp63349

Please see the hardware specifications

Hope this helps!

Jorge

Highlighted
Beginner

Looking for the Proper WAAS Upgrade Path

Thanks for the assistance!

Cheers,

Dan

CreatePlease to create content
Content for Community-Ad
August's Community Spotlight Awards