02-27-2013 07:33 AM
Hi,
how many maximum # of context ACE running A4(1.0) supports? what's command it check it?
Thanks.
Solved! Go to Solution.
03-07-2013 10:10 AM
Hi Gavin,
use the show license status to see the max context you can configure in your ACE
---------------------
Cesar R
ANS Team
02-27-2013 03:53 PM
Hello Gavin,
It depends of the platform you are running with.
For ACE30 here you have the details:
--------------------------------------------------------------------
By default, your ACE30 provides an Admin context and five user contexts that allows you to use multiple contexts if you choose to configure them. To increase the number of user contexts up to a maximum of 250, you must obtain a separate license from Cisco.
Here you have the link for that:
For ACE4710 here you have the details:
--------------------------------------------------------------------
By default, your ACE provides an Admin context and five user contexts that allows you to use multiple contexts if you choose to configure them. To increase the number of user contexts up to a maximum of 20, you must obtain a separate license from Cisco. For details about licensing, see the http://www.cisco.com/en/US/docs/app_ntwk_services/data_center_app_services/ace_appliances/vA4_2_0/configuration/administration/guide/license.html
Do not forget to mark it if it was useful.
Hope this is what you were looking for.
Jorge
03-07-2013 10:10 AM
Hi Gavin,
use the show license status to see the max context you can configure in your ACE
---------------------
Cesar R
ANS Team
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide