Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
I need design assistance with bgp & ospf.
1. site-2 should use green link as primary to reach site-1 and red link as back to reach site-1.2. site-3 should use its green link as primary to reach site-1.3. site-2 and site-3 use their directly connect...
I need help with route preference in OSPF (traffic engineering). 10.10.10.0/24 is redistributed into OSPF on R1 as E1 route. R4 is learning this route as "O E1" (intra-area E1) with cost 51 from R2 and it is also learning this route from R3 as "O IA...
what's best practice for EPG for application centeric mode? I will be creating BD per subnet.
this is greenfield deployment so do you recommend application centric or network centric? why?
my apologies. routes learned from R2 and R3 are both "O E1" type but R4 is preferring route learned from R2 even though it has higher cost. What can we do so that R4 prefers route learned from R3?
Thanks but this isn't L2 BD, right? BD subnet has an IP address. I am looking for how to configure L3 BD for network centric mode fabric in order to migrate from legacy to ACI fabric.
Thanks and also - what's best practice for Application profile and EPGs? should I've all EPGs in one application profile?
or should I've application profile per application? i.e. say I've two applications - Transaction App & Scan App and each of th...
Thanks.
what's best practice for subnets in BD? should we have one subnet per BD?
is I've multiple EGP tied to one BD then is broadcast limited to BD to EPGs?
